Hotels, luggage, secondhand furniture, and shared walls. They hitchhike, so clean homes can still be affected.
How to Set Up PestGuard for Best Results
PestGuard setup guide
Correct placement matters more than guessing
Most setup problems are simple: the unit is hidden, placed too far from the activity, or expected to cover several closed rooms at once. Use this guide to place PestGuard where it has the best chance to support the room.
Place it correctlyOpen wall outlet, not hidden behind furniture.
Cover the right roomStart where activity is actually happening.
Give it timeKeep it running continuously; do not expect overnight elimination.
Quick setup checklist
- Plug PestGuard directly into a wall outlet, not a hidden power strip.
- Keep the outlet open. Avoid placing the unit behind a bed, couch, cabinet, or curtain.
- Start with the room where activity is happening: bedroom, living room, kitchen, or hallway.
- Use one unit per room or problem zone. Closed doors, walls, and furniture can reduce coverage.
- Leave it plugged in continuously. Do not move it every few hours.
- For active or severe problems, combine PestGuard with cleaning, sealing, traps, or professional treatment when needed.
Before you plug it in: choose the real problem room
Do not start with the neatest outlet or the easiest hallway outlet. Start with the room where the issue is actually noticed: the bedroom where bites happen, the kitchen where activity appears, or the living room where pests are seen near furniture or baseboards.
If you only place a unit in a hallway while the activity is concentrated near the bed or kitchen cabinets, the setup may look correct but still underperform. The goal is not “one outlet somewhere in the home.” The goal is coverage in the room that matters.
Where should you plug it in?
Bedroom
Use an open wall outlet near the bed, nightstand area, or the side of the room where activity has been noticed. Keep it visible and uncovered.
Living room
Choose an open outlet near seating areas, baseboards, or the wall closest to the problem zone. Avoid outlets blocked by couches or cabinets.
Kitchen
Use a dry, open outlet away from water, heat, and crowded appliance areas. Put coverage in the kitchen if the problem is concentrated there.
Hallway or entry
A hallway unit can support coverage between rooms, but it should not replace units in the actual rooms where activity is happening.
How many PestGuard units do you need?
| Studio or single room | Start with 1 unit in the open area. |
| 1-bedroom apartment | Usually 2–3 units: bedroom plus living/kitchen area. |
| 2-bedroom apartment | Usually 3–4 units depending on layout. |
| Whole home | Cover bedrooms, kitchen, living room, and the rooms where activity appears first. |
If the problem is in multiple rooms, one unit in a hallway is usually not enough. Treat each room or problem zone separately.
What to expect after plugging it in
- Day 1–3: make sure the unit is placed correctly and left running.
- Week 1: watch the actual problem areas and adjust placement only if the outlet is blocked or far from the activity.
- Week 2 and beyond: keep it running continuously and use additional units if the issue is spread across multiple rooms.
Important: PestGuard is not an overnight extermination promise. For severe infestations, use it as part of a broader plan that may include cleaning, sealing entry points, traps, or professional help.
If you are dealing with bed bugs
Start in the bedroom first. Use an open outlet near the bed area, reduce clutter around the bed and baseboards, and avoid moving the unit repeatedly. If signs are present in more than one room, add coverage in those rooms too.
Troubleshooting: not seeing results yet?
- Check whether the unit is plugged directly into an open wall outlet.
- Check whether furniture, curtains, or cabinets are blocking it.
- Move the unit into the actual problem room instead of a distant hallway.
- Add another unit if the issue is spread across multiple rooms.
- Give the setup enough time before judging the result.
Need help with placement?
If you are not sure where to place each unit, contact support with your room layout, the number of units you have, and where the activity is happening. A clear photo of the outlet area or a simple room description is enough for us to suggest a better setup.
